• Single pot system - no primer required.
• Use the same paint for exterior and interior projects and for all coats.
• Covers more than twice the surface area than alkyd and plastic paints.

About Allbäck Linseed Oil Paint

• Paint and protect exterior and interior surfaces without solvents.
• Lasts for decades on wood, steel, iron, and plastic.
• For masonry surfaces such as concrete, use Allbäck's Emulsion technique.
• Add Allbäck Zinc Oxide Additive when painting outdoors or in humid areas.

Benefits

• Made for craftspeople by craftspeople for more than 40 years.
• Tested and well documented.
• Made with the highest quality ingredients and without solvents.
• Penetrate, protect, and nourish wood from the inside out.
• Superior coverage, longevity, and value.
• Paint in direct sunlight, and store at any temperature.
• Easy to maintain over time with Boiled Linseed Oil or Linseed Oil Wax.
• Clean up with Linseed Soap and water.
• For the health of the building, the craftsperson, and the environment.

Technical Details

Binder: Boiled, cold-pressed, cleaned, and sterilized linseed oil from Sweden.
Pigment: Titanium dioxide, Chalk.
Drier: Manganese Siccative.
Thinning: If necessary, thin with max. 5% Allbäck Purified Boiled Linseed Oil.
Dry matter: 100% by volume. Nothing evaporates from the paint.
VOCs: <5mg / L, natural oil only.
Application: Stir well. Apply thin coats with a stiff brush.
Coverage: 15 - 20 m² per litre (161 - 215 sqft per litre), depending on the substrate.
Cleaning: Allbäck Linseed Soap and water. Rinse well and allow to dry. Store brushes hanging in Allbäck Purified Raw Linseed Oil.
Drying time: Approximately 24 hours at room temperature, with good ventilation and low humidity.
NCS: S 0300-N